| head gasket? | |
|
|
Author | Message |
---|
airman240 Junior member
Posts : 43 Join date : 2011-09-28 Age : 33 Location : Racine
| Subject: head gasket? Tue Nov 15, 2011 4:56 pm | |
| Hey got another question, Im running the precision 6152e on my sr20det, Im just wonderin if anyone has any recommendations for head gasket for lower compression? Im going to put in 1000cc injectors, so im just trying to figure out what would be best for the motor before i need to rebuild it. | |
|
| |
600SX Admin
Posts : 2514 Join date : 2010-08-19 Age : 43 Location : Twin Lakes
| Subject: Re: head gasket? Tue Nov 15, 2011 5:35 pm | |
| One of the turbo gurus will chime in, I'm sure. | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: head gasket? Tue Nov 15, 2011 5:58 pm | |
| what gasket is in the car as of right now? i would think you should be ok, depending on power/tune. | |
|
| |
lssilvia Senior member
Posts : 1322 Join date : 2011-07-23 Age : 42 Location : pleasent prarie
| Subject: Re: head gasket? Tue Nov 15, 2011 6:04 pm | |
| | |
|
| |
93sapphirecoupe Senior member
Posts : 662 Join date : 2011-05-05
| Subject: Re: head gasket? Tue Nov 15, 2011 7:08 pm | |
| most people seem to run the apexi or cosworth stuff. my car is running the stock gasket without any issues. | |
|
| |
mattchow88 Senior member
Posts : 345 Join date : 2010-10-25 Age : 252 Location : Appleton/oshkosh/wautoma
| Subject: Re: head gasket? Tue Nov 15, 2011 8:12 pm | |
| I ran the apexi 1.1 with my gt2871 and 750cc. It also depends on if your block has been decked off and or head surfaced. | |
|
| |
airman240 Junior member
Posts : 43 Join date : 2011-09-28 Age : 33 Location : Racine
| Subject: Re: head gasket? Wed Nov 16, 2011 3:27 pm | |
| Right now the head/gasket is all sr20det stock. I heard the motor can take like 400hp ish so that's why I'm asking around and trying to get some heads up on it before i start workin on it. Thanks for any help tho | |
|
| |
mattchow88 Senior member
Posts : 345 Join date : 2010-10-25 Age : 252 Location : Appleton/oshkosh/wautoma
| Subject: Re: head gasket? Wed Nov 16, 2011 6:53 pm | |
| | |
|
| |
traphikcod4 Senior member
Posts : 1246 Join date : 2010-08-19 Age : 410 Location : oak creek, wisconsin
| Subject: Re: head gasket? Wed Nov 16, 2011 9:22 pm | |
| | |
|
| |
93sapphirecoupe Senior member
Posts : 662 Join date : 2011-05-05
| Subject: Re: head gasket? Wed Nov 16, 2011 9:38 pm | |
| been running mine over 300 hp for 6 years now on stock everything...400 is easy as long as your tune is good. | |
|
| |
airman240 Junior member
Posts : 43 Join date : 2011-09-28 Age : 33 Location : Racine
| Subject: Re: head gasket? Thu Nov 17, 2011 4:42 pm | |
| Don't really know exactly what my hp goal is, biggest i can reach with stock motor for now i supposed. Just doing the turbo swap over winter so im trying to figure stuff out. But thanks for the info guys, im gna do a slight tun with my afc but hopefully get it to a shop for a professional tune sooner or later after everythings working. | |
|
| |
Sponsored content
| Subject: Re: head gasket? | |
| |
|
| |
| head gasket? | |
|