| 2FAS240's 600+HP build | |
|
+16Riggle VNG704 s13.240sx cool_kat 240sxguy 93sapphirecoupe kouki_chee pancho y onions ohhhizzzy Lizmo Jsteez ino20 bassboy3313 Flicktitty 600SX 2FAS240 20 posters |
|
Author | Message |
---|
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: 2FAS240's 600+HP build Sat Aug 21, 2010 4:14 am | |
| so this is my build... i copied and pasted a lot of it from other forums i post on cause i didn't feel like making it all over again. its all in order so yes there have already been two occasions where i've had a part due to some minor issues haha... its a 95 SE been working on this build for 3 years almost drove in between steps hit a few bumps in the road but everything is on track now and the turbo setup should be all on and done prolly within the next month if not sooner... --THE LIST-- -WHAT I GOT SO FAR -aries 8.8.1 pistons -crower rods -stage 2 crower cams -supertech dual valve springs -arp main studs -arp head studs -mishimoto radiater & fan -95lb precision turbo injectors -fuelab pressure regulator -turbo 240 fuel rail -dual walbro 255's -SPEC stage 3 clutch don't worry it will get replaced! -350Z 35th anniversary rims -Garrett Twinscroll GT3582R -Full-Race Twinscroll Manifold -Full-Race downpipe -Garrett Intercooler -Apexi Noir Exhaust -AEM EMS -AEM Wideband -AEM truboost -And of course some misc stuff mishimoto radiator hoses, greddy sandwich plate vibrant intercooler piping and couplers just hit a road bump though found 3 wrist pin retainer clips in my oil pan 3 days ago when i was gettin ready to weld on the oil bung and pulled the motor apart tonight and three of the cylinder walls have some nice grooves in them so now i gotta find another block Cylinder 2 Cylinder 4 Cylinder 3 alrighty i'm back !! so i got a new block sent it to the machine shop got it bored .020 over a new set of arias pistons got it decked had them balance the whole rotating assembly took a month but i finally got it back from them 2 weeks ago and started putting it together again and this is whats been goin on ! this is what i have for gauges i just finished setting that up the other day Block Pistons and Rods short block ! Full Race Manifold My Kickin Set up !!!! my battery relocation set up... took a while but what do you think ?? so this is my Dual Walbro Setup... what are your thoughts??? | |
|
| |
600SX Admin
Posts : 2514 Join date : 2010-08-19 Age : 43 Location : Twin Lakes
| Subject: Re: 2FAS240's 600+HP build Sat Aug 21, 2010 10:51 am | |
| I like it. That dual pump setup looks like a good idea, and maybe one I'll have to try. | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Sat Aug 21, 2010 12:07 pm | |
| Looks good Kyle. hopefully when you get it done you bring it down to wisconsin for a weekend. | |
|
| |
bassboy3313 Be nice, I'm new
Posts : 12 Join date : 2010-08-20 Age : 35 Location : Brookfield
| Subject: Re: 2FAS240's 600+HP build Sat Aug 21, 2010 4:11 pm | |
| Looking real good. Sounds like a hefty and costly project, but WELL worth it. Nice build man. | |
|
| |
ino20 Member
Posts : 128 Join date : 2010-08-19 Age : 32 Location : Lansing,IL
| Subject: Re: 2FAS240's 600+HP build Sat Aug 21, 2010 8:58 pm | |
| | |
|
| |
Jsteez Member
Posts : 71 Join date : 2010-08-19 Age : 34 Location : Muskego
| Subject: Re: 2FAS240's 600+HP build Sun Aug 22, 2010 3:48 pm | |
| wow looks good. you know hat you want and your shootin for it. you should def bring it to wisconsin for a meet when you have the time and finish it. | |
|
| |
Lizmo Admin
Posts : 1668 Join date : 2010-08-19 Age : 36 Location : milwaukee wi
| Subject: Re: 2FAS240's 600+HP build Sun Aug 22, 2010 4:11 pm | |
| | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Sun Aug 22, 2010 5:56 pm | |
| thanks for the confidence guys ! it was a lot more costly than o fist imagined but things kept evolving has the build went on... its super close to being done to we will prolly pull it in to the shop in a week or 2 to put the turbo setup on and PS i have no problem driving to WI... its nice to talk to 240's with people there are so few here in MN alls i here is Honda this Honda that haha | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| |
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Mon Aug 23, 2010 10:51 am | |
| How many more miles you got left for the break in? | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Mon Aug 23, 2010 3:02 pm | |
| Haha well I'm at 300 now but its as sound as could be its going in the shop in weeks no matter what | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Mon Aug 23, 2010 8:18 pm | |
| 2 weeks* haha apparently the 2 didn't get in there | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Thu Aug 26, 2010 11:38 am | |
| Well man, i'm excited to see some vid's of that car once the turbo setup is on and it's ready to run. | |
|
| |
ohhhizzzy Senior member
Posts : 805 Join date : 2010-08-20 Location : Delavan wi
| Subject: Re: 2FAS240's 600+HP build Thu Aug 26, 2010 12:14 pm | |
| this is an awesome project | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Thu Aug 26, 2010 1:55 pm | |
| Well just found out my roommate prolly won't get to switch back to days so I will prolly pull it in the garage next weekend and start on it!!! I was just trying to be considerate since I've been building cars with this buddy since we were 15
I'm so pumped haha I can't wait to finish it finally!!! Pretty sure I have every component I need for the turbo setup so it should go together pretty quick! | |
|
| |
600SX Admin
Posts : 2514 Join date : 2010-08-19 Age : 43 Location : Twin Lakes
| Subject: Re: 2FAS240's 600+HP build Sun Sep 19, 2010 8:13 pm | |
| | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Mon Sep 20, 2010 7:14 pm | |
| of course i have an update i actually couldn't find this webpage after my history got cleared so this is where i am currently at... EGR block off plate Before working on the fuel setup Manifold! and of course turbo!! still a work in progress hope to get a lot done this week so stay tuned for updates! | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Mon Sep 20, 2010 7:43 pm | |
| | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Tue Sep 21, 2010 6:46 pm | |
| Looks great Kyle, good to see the snail back on there.
How do you like the fuellab FPR?
i know we have talked about this in the past, but whats your fuel lines? | |
|
| |
Lizmo Admin
Posts : 1668 Join date : 2010-08-19 Age : 36 Location : milwaukee wi
| Subject: Re: 2FAS240's 600+HP build Tue Sep 21, 2010 9:23 pm | |
| nice build! can't wait to see it movin! | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Mon Oct 04, 2010 10:01 pm | |
| did you ever get it running turbo'd kyle?
you being in MN its bout ready to snow. | |
|
| |
2FAS240 Junior member
Posts : 33 Join date : 2010-08-19 Age : 35 Location : Mankato, MN
| Subject: Re: 2FAS240's 600+HP build Sun Oct 17, 2010 11:49 pm | |
| | |
|
| |
Flicktitty Admin
Posts : 1774 Join date : 2010-08-19 Age : 37 Location : Delavan
| Subject: Re: 2FAS240's 600+HP build Wed Oct 27, 2010 12:09 pm | |
| Money from Vegas gonna update the car at all? | |
|
| |
600SX Admin
Posts : 2514 Join date : 2010-08-19 Age : 43 Location : Twin Lakes
| Subject: Re: 2FAS240's 600+HP build Wed Feb 23, 2011 5:03 pm | |
| - Flicktitty wrote:
- Money from Vegas gonna update the car at all?
I know... I'm dying to see!!! Maybe he never made it back..... | |
|
| |
Lizmo Admin
Posts : 1668 Join date : 2010-08-19 Age : 36 Location : milwaukee wi
| Subject: Re: 2FAS240's 600+HP build Wed Feb 23, 2011 5:37 pm | |
| yea what happened to him lol | |
|
| |
Sponsored content
| Subject: Re: 2FAS240's 600+HP build | |
| |
|
| |
| 2FAS240's 600+HP build | |
|