Bee R on KA24DE

Anyone have experience? It's four wires...should be a walk in the park but I can't seem to get it. Red and black are obviously power and ground, it's the green and yellow wires that are throwing me for a loop. Rpm and cas signal wires I believe. I've tried two or three different pins from different write ups I've found but have had no luck. And then during my research I read that bee r possibly switched the yellow and green wires around on either the Japanese directions that arent for the KA or the unit itself. This only added to my confusion. Any help would be appreciated greatly. Oh and I've also tried both auto and manual ecus if that matters. I read that you possibly need a manual? And one last thing that I haven't had clarification on is which wire to cut. I've tried both the grey and brown...I've read both. FML.

Not sure if you have looked at any of these ones?

[You must be registered and logged in to see this link.]

Actually both. Donnie is a really cool guy. He was trying to help me out while he was in iraq. I'd be the last of my worries over there lol. Do you know if either of those are confirmed working pins for the wires? Maybe I'm doing something wrong...

no idea, can't be of much help as i've never really looked into wiring one of those up.

It's all good. Thanks for trying man. I should just sell it and buy an msd ignition box or ems.